您好,歡迎進入上海力敏實業有限公司網站!
一鍵分享網站到:
產品搜索
PRODUCT SEARCH
產品分類
PRODUCT CLASSIFICATION
查看更多 >>
相關文章
RELEVANT ARTICLES
您現在的位置:首頁 >> 產品中心 >> >> >> B-1255VECTOR 生物素莧尾狀凝集素(ACL,ACA) BIOTIN-ACL

VECTOR 生物素莧尾狀凝集素(ACL,ACA) BIOTIN-ACL

  • 更新時間:  2023-07-24
  • 產品型號:  B-1255
  • 簡單描述
  • VECTOR 生物素莧尾狀凝集素(ACL,ACA) BIOTIN-ACL
    Biotinylated Amaranthus Caudatus Lectin (ACL, ACA)
    Detection of Glycoproteins using Lectins in Histochemistry,
    ELISA, and Western Blot Applications
詳細介紹

VECTOR 生物素莧尾狀凝集素(ACL,ACA) BIOTIN-ACL

The following protocols offer guidelines for assay development using lectin-based detection of glycoproteins
present in tissue sections, adsorbed onto microtiter plates, or transferred from electrophoretic
gels onto nitrocellulose or PVDF membranes.
Histochemistry:
1a. Staining procedure for paraffin sections: Deparaffinize and hydrate tissue sections through
xylenes or other clearing agents and graded alcohol series and rinse for 5 minutes in tap water.
If required, retrieve antigens using the Antigen Unmasking Solution (H-3300 or H-3301).
1b. Staining procedure for frozen sections: Air dry sections. Immediay before staining, fix
sections with acetone. Transfer slices to buffer. If endogenous enzyme activities are present,
inactivate using appropriate methods.
2. Perform Streptavidin/Biotin blocking if required following kit instructions (SP-2002). Do not
use SP-2001. Block non-specific binding by incubating section with Carbo-Free™ Blocking
Solution (Cat. No. SP-5040) for 30 minutes at room temperature. Blot excess blocking solution
from the sections.
3. Apply biotinylated lectin at approximay 2-20 μg/ml in PBS (10 mM sodium phosphate, 150
mM NaCl, pH 7.4) to the sections and incubate for 30 minutes at room temperature. Wash with
TPBS (PBS + 0.05% Tween™20).
4. Prepare VECTASTAIN®
® ABC (peroxidase, Cat. No. PK-6100) or VECTASTAIN® ABC-AP
(alkaline phosphatase, Cat. No. AK-5000) reagents according to the kit instructions. Apply to the
sections and incubate for 30 minutes at room temperature. Wash with TPBS.
5. Apply an appropriate precipitating substrate for the enzyme system used in step 4. For peroxidase,
ImmPACT™ DAB (Cat. No. SK-4105) is recommended; for alkaline phosphatase, Vector® Red
(Cat. No. SK-5100). Rinse in tap water.
6. Counterstain (optional), clear and mount. For galactose or GalNAc-specific lectins avoid mounting
in glycerol-based mounting media.
VECTOR 生物素莧尾狀凝集素(ACL,ACA) BIOTIN-ACL

ELISA:
1. Adsorb target protein to microtiter plate by placing 50-200 μl of approximay 3 μg/ml glycoprotein
solution into the desired wells. Some wells may be left untreated as negative controls. Incubate at
37 oC for 1 hour. Wash wells three times with TPBS (PBS + 0.05% Tween™20).
2. Block non-specific binding by filling each well to the brim with Carbo-Free™ Blocking Solution
(Cat. No. SP-5040) for 30 minutes at room temperature. Wash wells three times with TPBS.
3. Apply 50-200 μl of approximay 2-20 μg/ml biotinylated lectin in PBS to the wells and incubate
for 30 minutes at room temperature. Wash wells three times with TPBS.

4. Prepare VECTASTAIN®
® ABC (peroxidase, Cat. No. PK-6100) or VECTASTAIN® ABC-AP
(alkaline phosphatase, Cat. No. AK-5000) reagents according to the kit instructions. Apply to the
wells and incubate for 30 minutes at room temperature. Wash wells three times with TPBS.
5. Apply an appropriate non-precipitating substrate for the enzyme system used in step 4. For
peroxidase, ABTS (Cat. No. SK-4500) is recommended; for alkaline phophatase, pNPP (Cat. No.
SK-5900).
6. Quantify the colored reaction product by spectrophotometry.
Western Blot:
1. Perform electrophoresis and transfer proteins to a membrane according to standard procedures.
2. Block non-specific binding by incubating the membrane in Carbo-Free™ Blocking Solution (Cat.
No. SP-5040) for 30 minutes at room temperature. Use a sufficient volume to compley cover
the membrane.
3. Incubate membrane in PBS containing approximay 2-20 μg/ml biotinylated lectin for 30 minutes
at room temperature. Wash with TPBS (PBS +0.05% Tween™20).
4. Prepare VECTASTAIN®
® ABC (peroxidase, Cat. No. PK-6100) or VECTASTAIN® ABC-AP
(alkaline phosphatase, Cat. No. AK-5000) reagents according to the kit instructions. Incubate the
membrane in the reagent for 30 minutes at room temperature. Wash with TPBS.
5. Apply an appropriate substrate for the enzyme system used in step 4. For peroxidase, DuoLuX™
Chemiluminescent/Fluorescent Substrate for Peroxidase (Cat. No. SK-6604) or ImmPACT™ DAB
(Cat. No. SK-4105) are recommended; for alkaline phosphatase, Chemiluminescent/Fluorescent
Substrate for Alkaline Phosphatase (Cat. No. SK-6605) or BCIP/NBT (Cat. No. SK-5400) are
recommended.
Negative Controls
Negative controls should be run in parallel in each of the above described methodologies to validate
binding results. When applying lectins, one of the most appropriate negative controls is to preabsorb
the lectin with a concentration of a defined sugar, with which, the lectin has a known high affinity.
Vector Labs offers a series of sugars that are intended for such a purpose.
The lectin is diluted to a suitable working concentration in a solution containing approximay
200 mM to 500 mM of the sugar. This mixture is left to bind at room temperature for 30 to 60 min.
Following this absorption incubation, the mixture is substituted into the procedure in place of the unabsorbed
lectin and incubated under the same conditions. The subsequent detection procedure is followed
as for the test method. In most cases the vast majority of lectin binding to the tissue section (membrane
blot, etc.) will be eliminated. Some trace binding to the section (blot etc) may still be present under
these conditions and probably indicates presence of secondary or tertiary sugar preferences. These negative
control results should be compared with the test results to determine specificity of binding

 

上海力敏實業有限公司代理VECTOR產品,咨詢 詳細產品信息


留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7
友情鏈接: 等離子去膠機       電液伺服萬能材料試驗機       電液伺服液壓萬能試驗機       電子拉伸萬能試驗機       材料拉伸試驗機       金剛石鉆孔機       北斗定位器       控溫式遠紅外消煮爐       切膠儀       無塵紙       金屬液氮冷凍箱       傳力接頭       磁座鉆       LEM電壓傳感器       鋁儲罐      
主站蜘蛛池模板: 亚洲啪啪免费视频| 怡红院日本一道日本久久| 国产av无码专区亚洲av麻豆| a级毛片高清免费视频在线播放| 日产乱码卡1卡2卡三免费| 亚洲激情综合网| 精品久久久噜噜噜久久久| 国产精品一线二线三线精华液 | 男女午夜爽爽大片免费| 国产成人黄色在线观看| 一区二区三区免费在线观看 | 5g探花多人运动罗志祥网址| 天天天操天天天干| 一区视频免费观看| 成人午夜视频精品一区| 亚洲丁香婷婷综合久久| 欧美色欧美亚洲高清在线观看 | 国产素人在线观看| 中文国产成人精品少久久| 日本伊人色综合网| 亚洲成av人片在线观看www| 精品香蕉在线观看免费| 国产乱理伦片在线观看播放| 777777农村一级毛片| 在现免费看的www视频的软件| sss欧美一区二区三区| 快点使劲舒服爽视频| 两个人看的www日本动漫| 最新亚洲春色av无码专区| 免费久久一级欧美特大黄| 野战爱爱全过程口述| 国产精品无码久久久久| 99re在线观看| 拍拍拍无挡免费视频网站| 亚洲av永久综合在线观看尤物| 狠狠色综合网久久久久久| 国产一区二区三区免费视频| 里番本子侵犯肉全彩3d| 国产免费无遮挡精品视频| 韩国一级在线观看| 国产内射999视频一区|